Portoro Agglomerated stone Engineered Stone Slabs
Engineered stone (US name) is also commonly referred to as agglomerate or agglomerated stone, the last term being that recognised by European Standards (EN 14618), although to add to the terminological confusion, this standard also includes materials manufactured with a cementitious binder. The quartz version (which end consumers are much more likely to directly deal with) is commonly known as 'quartz surface' or just 'quartz'.
1Description:Fine Particle - Engineered stone, artificial marble, artificial stone, Agglomerated Stone
2Materials:Stone Powder,UPR (unsaturated polyester resin ), and a small amount of inorganic pigment and initiator.
3Color:White, Black, Red, Blue, Grey, Brown, base on samples.
4 Size: a)-Slabs size: 2400x1600mm, 2700x1800mm, 3200x1600mm
b)-Cut-to-size: 1200x1200mm, 800x800mm, 1200x800mm, 600x600mm, 300x300mm, 300x600mm
and other no-standard panels size.
c)-Countertop: 48*26". 70*26", 78*26", 96"x26", 108"x26"
d)-Island: 72"x36", 96"x36", 96"x40", 108"x44"
e)-Vanity top: 22"x25", 22"x31", 22"x37", 22"x49", 22"x61", 22"x73"
6Finish:a)-Surface Finish: Polished, Honed, Antique, Abrasive Blasting
b)-Side Finish: Flat, Easted, Stright, Bevel, Bullnose, Full Bullnose, Ogee.
7Ideal Use:Countertop, kitchen tops, bathroom vanity top,worktops, laundry,table tops,bench top, island tops,
bar tops, back splashes, shower stalls, tub surrounds ,wall tile, wall cladding, floor tile; and also used
for airport, metro, shopping mall, hotel.
8 Packing: a)-Slabs: 15-21pcs pack in a seaworthy bundle (after fumigation)
b)-Cut-to-size:60-80pcs pack in a seaworthy crates (after fumigation)
c)-Countertop, Vanity top:12-25pcs pack in a seaworthy crates,each surface cover with PE film (after fumigation)
d)Stair Step:80-120pcs pack in a seaworthy crates, each 10-15pcs a bundle (after fumigation)
How is Unisun Stone made?
1. Classified & Purify
Raw materials are classified and purified to ensure the quality before mixing.
Raw materials are fed into mixers and blended together. Different colors have different time-table.
3. Molding & Pressing
The mixture is poured into mold and formed into block sizes, then pressed under a condition of vacuum and vibration process.
After 8-15 days drying, we cut the block into slab according to customer’s required.
Slabs are then gauged, calibrated and polished.
6. Quality Inspection
Slabs will need to pass the quality inspection before packed and labeled.
*Sending pictures of container loading after container loaded.
Large Particle Engineered Stone suppliers
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest